G.HSDSL Config through a Cisco 828 router

I'll copy this here for reference purposes. Used a few of these configs to connect one of my customers branch offices to their headquarters.

Be careful of the vpi/vci values which should be:
Point to point g.shdsl links: 0/35
Internet g.shdsl links: 8/35

!
controller DSL 0
mode atm
line-term cpe
line-mode 2-wire line-zero
dsl-mode shdsl symmetric annex B
line-rate auto
!

!
interface ATM0
no ip address
ip nat outside
ip virtual-reassembly
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
bandwidth 2048
ip nat outside
ip virtual-reassembly
pvc 8/35
pppoe-client dial-pool-number 1
!
!

!
interface Dialer0
mtu 1476
bandwidth 2048
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp header-compression iphc-format
ip tcp adjust-mss 800
load-interval 30
dialer pool 1
ppp authentication pap chap callin
ppp chap hostname user@isp
ppp chap password 0 123
ppp pap sent-username user@isp password 0 123
ppp ipcp dns request
ip rtp header-compression iphc-format
!